Education Information
2001 - 2007
2001 - 2007Doctorate
Ege University, Faculty Of Engineering, Makine Mühendisliği Bölümü, Turkey
1997 - 2001
1997 - 2001Postgraduate
Ege University, Faculty Of Engineering, Makine Mühendisliği Bölümü, Turkey
1991 - 1997
1991 - 1997Undergraduate
Dokuz Eylul University, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Turkey
Research Areas
Mechanical Engineering, Construction and Manufacturing, Material, Engineering and Technology
Academic Titles / Tasks
2018 - Continues
2018 - ContinuesAssociate Professor
Ege University, Faculty Of Engineering, Makine Mühendisliği Bölümü
2018 - 2018
2018 - 2018Assistant Professor
Ege University, Faculty Of Engineering, Makine Mühendisliği Bölümü
2009 - 2018
2009 - 2018Assistant Professor
Ege University, Faculty Of Engineering, Makine Mühendisliği Bölümü
Managerial Experience
2019 - Continues
2019 - ContinuesBölüm Akademik Teşvik Değerlendirme Komisyonu Üyesi
Ege University, Faculty of Engineering, Makine Mühendisliği Bölümü
2018 - Continues
2018 - ContinuesHead of Department
Ege Üniversitesi, Faculty of Engineering, Makina Mühendisliği
2019 - 2021
2019 - 2021Rektörlük Akademik Teşvik Değerlendirme Komisyonu Üyesi
Ege University, Faculty Of Engineering, Makine Mühendisliği Bölümü
Non Academic Experience
2019 - 2021
2019 - 2021General Manager
Technology Development Zone, Ege University, Makine Mühendisliği Bölümü
Courses
Advising Theses
2022
2022Doctorate
Fotovoltaik hücreler içeren farklı fiber takviyeli polimerlerle kompozit yapı üretimi ve bir ulaşım taşıtında uygulaması
Sarıkanat M. (Consultant)
K.ODABAŞI(Student)
2019
2019Postgraduate
İyonik polimer metal kompozit eyleyicilerin sayısal yöntemler kullanılarak analizi
Sarıkanat M. (Consultant)
S.EGEMEN(Student)
2019
2019Postgraduate
Otomotiv sektöründe kullanılan cam fiber takviyeli mühendislik plastiklerinin aşınma direncinin iyileştirilmesi
Sarıkanat M. (Consultant)
B.YİĞİT(Student)
2019
2019Postgraduate
Lineer motor tasarımı, imalatı ve karakterizasyonu
Sarıkanat M. (Consultant)
C.TÜRKMEN(Student)
2017
2017Postgraduate
Toz tutmayan anistatik kompozit vernik üretimi
Sarıkanat M. (Consultant)
S.SANJARI(Student)
2015
2015Doctorate
Fabrication and characterization of ionic polymer-metal composites
SARIKANAT M.
O.ÖZDEMİR(Student)
2013
2013Postgraduate
Lif/matris oranının termoplastik kompozit malzemelerin mekanik özelliklerine etkisi
SARIKANAT M.
S.EMADİ(Student)
2012
2012Postgraduate
Tabakalı polimer kompozit kirişlerde elektromanyetik alan ile titreşim sönümlenmesi
SARIKANAT M.
K.SEVER(Student)
2010
2010Postgraduate
Kokil kalıba alüminyum döküm proseslerinin iyileştirilmesi
SARIKANAT M.
A.BİLGETEKİN(Student)
Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes
2022
2022Hybrid Carbon Filled Thermoplastic Composites: Synergistic effect of Synthetic Graphite and Graphene Nanoplatelets on Thermal and Mechanical Properties of Polyamide 4.6
Altay L. , Kızılkan E., Seki Y., İşbilir A., Sarıkanat M.
PLASTICS RUBBER AND COMPOSITES PROCESSING AND APPLICATIONS, vol.1, no.1, pp.1-21, 2022 (Journal Indexed in SCI)
2022
2022Thermal Conductive Polybutylene Terephthalate Composites via Incorporation of Hybrid Synthetic Graphite and Carbon Fiber
Yenier Z. , Değer S., Altay L. , Seki Y., Bigün Ö., Sarıkanat M.
Journal Of Thermoplastic Composite Materials, vol.1, no.1, pp.1-24, 2022 (Journal Indexed in SCI)
2021
2021Improvement of traditional clay bricks' thermal insulation characteristics by using waste materials
ANDİÇ ÇAKIR Ö. , Son A. E. , Surmelioglu S., Tosun E., SARIKANAT M.
CASE STUDIES IN CONSTRUCTION MATERIALS, vol.15, 2021 (Journal Indexed in SCI)
2021
2021Enhanced in-plane and through-plane thermal conductivity and mechanical properties of polyamide 4.6 composites loaded with hybrid carbon fiber, synthetic graphite and graphene
SEKİ Y., Kizilkan E., Isbilir A., SARIKANAT M. , ALTAY L.
POLYMER COMPOSITES, vol.42, no.9, pp.4630-4642, 2021 (Journal Indexed in SCI)
2021
2021Improving thermal conductivity of polybutylene terephthalate composites with hybrid synthetic graphite and carbon fiber
Yenier Z. , Aker S., Seki Y., Altay L. , Bigun O., Sarıkanat M.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2021 (Journal Indexed in SCI)
2021
2021Thermal and Mechanical Behavior of Graphene Loaded Synthetic Graphite /Polyphenylene Sulfide (PPS) Composites
Altay L. , Tantuğ G., Çekin H., Seki Y., Sarıkanat M.
HIGH TEMPERATURES-HIGH PRESSURES, vol.1, no.1, pp.1-9, 2021 (Journal Indexed in SCI)
2020
2020Graphene oxide modified carbon fiber prepregs: A mechanical comparison of the effects of oxidation methods
ACAR V., ERDEN S. , SARIKANAT M. , Seki Y., AKBULUT H., Seydibeyoglu M. O.
EXPRESS POLYMER LETTERS, vol.14, no.12, pp.1106-1115, 2020 (Journal Indexed in SCI)
2020
2020A detailed characterization of sandalwood-filled high-density polyethylene composites
Atagur M., Kaya N., Uysalman T., Durmuskahya C., SARIKANAT M. , Sever K., et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2020 (Journal Indexed in SCI)
2020
2020Mechanical and thermal properties of Carpinas betulus fiber filled polypropylene composites
Atagur M., Seki Y., Pasaoglu Y., Sever K., Seki Y., SARIKANAT M. , et al.
POLYMER COMPOSITES, vol.41, no.5, pp.1925-1935, 2020 (Journal Indexed in SCI)
2020
2020Effect of surface modification of carbon fibers on properties of carbon/epoxy composites
YENİER Z. , ALTAY L. , SARIKANAT M.
EMERGING MATERIALS RESEARCH, vol.9, no.1, pp.110-118, 2020 (Journal Indexed in SCI)
2020
2020Size effects of graphene nanoplatelets on the properties of high-density polyethylene nanocomposites: morphological, thermal, electrical, and mechanical characterization
Evgin T., Turgut A., Hamaoui G., Spitalsky Z., Horny N., Micusik M., et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY, vol.11, pp.167-179, 2020 (Journal Indexed in SCI)
2019
2019Size effect of graphene nanoplatelets on the properties of high density polyethylene nanocomposites: morphological, thermal, electrical and mechanical characterizations
Sarıkanat M. , Evgin T., Turgut A.
Beilstein Journal of Nanotechnology, vol.1, no.1, pp.1-14, 2019 (Journal Indexed in SCI)
2019
2019Morphological, electrical, mechanical and thermal properties of high-density polyethylene/multiwall carbon nanotube nanocomposites: effect of aspect ratio
EVGİN T., TURGUT A., Šlouf M., Špitalsky Z., Micusik M., SARIKANAT M. , et al.
MATERIALS RESEARCH EXPRESS, vol.6, no.9, 2019 (Journal Indexed in SCI)
2019
2019The effect of pumice powder on mechanical and thermal properties of polypropylene
Sever K., Atagür M., Tuncalp M., Altay L. , Seki Y., Sarıkanat M.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, vol.32, pp.1092-1106, 2019 (Journal Indexed in SCI)
2019
2019Effect of Surface Modification of Carbon Fiber on Carbon/Epoxy Composites
Yenier Z. , Altay L. , Sarıkanat M.
EMERGING MATERIALS RESEARCH, vol.1, pp.1-10, 2019 (Journal Indexed in SCI Expanded)
2019
2019Polypropylene Containing Phase Change Materials for Cooling Applications
Altay L. , Seki Y., Özkaya M., Seviğ Tantuğ G., İşbılır A., Sarıkanat M.
EMERGING MATERIALS RESEARCH, vol.1, pp.1-12, 2019 (Journal Indexed in SCI Expanded)
2019
2019Investigation of thermal and mechanical properties of synthetic graphite and recycled carbon fiber filled polypropylene composites
Atagür M., Akyüz O., Sever K., Seki Y., Seydıbeyoglu O., İşbilir A., et al.
MATERIALS RESEARCH EXPRESS, vol.6, 2019 (Journal Indexed in SCI)
2019
2019The effect of gold electrode thicknesses on electromechanical performance of Nafion-based Ionic Polymer Metal Composite actuators
Yilmaz O. C. , Sen I., GÜRSES B. O. , Ozdemir O., Cetin L., SARIKANAT M. , et al.
COMPOSITES PART B-ENGINEERING, vol.165, pp.747-753, 2019 (Journal Indexed in SCI)
2019
2019Effect of Ulexite on Mechanical, Thermal, and Flame Properties of Halogen-Free Fire Retardant Polypropylene
Altay L. , Seki Y., Uysalman T., Tantug G. S. , İşbilir A., Sarıkanat M.
ACTA PHYSICA POLONICA A, vol.135, no.5, pp.1143-1146, 2019 (Journal Indexed in SCI)
2019
2019Linear Low Density Polyethylene Filled with Almond Shells Particles: Mechanical and Thermal Properties
Altay L. , Güven A., Atagür M., Uysalman T., Tantug G. S. , Özkaya M., et al.
ACTA PHYSICA POLONICA A, vol.135, no.5, pp.1042-1044, 2019 (Journal Indexed in SCI)
2019
2019The Effect of Various Minerals on Sound Transmission Loss and Mechanical Properties of Polypropylene
Sarıkanat M. , Seçgin A., Uysalman T., Tantug G. S. , Özkaya M., Atagür M., et al.
ACTA PHYSICA POLONICA A, vol.135, no.5, pp.1055-1057, 2019 (Journal Indexed in SCI)
2019
2019Thermal Conductivity and Flammability of Ulexite Filled Rigid Polyurethane Materials
Gürlek G. , Altay L. , Sarıkanat M.
ACTA PHYSICA POLONICA A, vol.135, no.4, pp.825-828, 2019 (Journal Indexed in SCI)
2019
2019The Using of Graphene Nano-Platelets for a Better through-Plane Thermal Conductivity for Polypropylene
Seki Y., Avci B., Uzun S., Kaya N., Atagur M., Sever K., et al.
POLYMER COMPOSITES, vol.40, 2019 (Journal Indexed in SCI)
2019
2019Synergistic effects of graphene nanoplatelets in thermally conductive synthetic graphite filled polypropylene composite
Altay L. , Atagur M., Sever K., Sen I., Uysalman T., Seki Y., et al.
POLYMER COMPOSITES, vol.40, pp.277-287, 2019 (Journal Indexed in SCI)
2019
2019The effect of methyl-tri-n-butylammonium methylsulfate and graphite nanoplates on production of antistatic acrylic polymer
Seki Y., INCE M., YILDIZ N., Seki Y., ERGÜL O., SEVER K., et al.
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, vol.58, no.13, pp.1471-1479, 2019 (Journal Indexed in SCI)
2018
2018Mechanical, thermal, and viscoelastic investigations on expanded perlite-filled high-density polyethylene composite
Atagur M., SARIKANAT M. , UYSALMAN T., POLAT O., ELBEYLI I. Y. , Seki Y., et al.
JOURNAL OF ELASTOMERS AND PLASTICS, vol.50, no.8, pp.747-761, 2018 (Journal Indexed in SCI)
2018
2018Fabrication and characterization of olive pomace filled PP composites
Kaya N., Atagur M., Akyuz O., Seki Y., SARIKANAT M. , Sutcu M., et al.
COMPOSITES PART B-ENGINEERING, vol.150, pp.277-283, 2018 (Journal Indexed in SCI)
2018
2018Manufacturing of recycled carbon fiber reinforced polypropylene composites by high speed thermo-kinetic mixing for lightweight applications
ALTAY L. , Atagur M., Akyuz O., Seki Y., SEN I., SARIKANAT M. , et al.
POLYMER COMPOSITES, vol.39, no.10, pp.3656-3665, 2018 (Journal Indexed in SCI)
2018
2018Effects of Sandblasting and Silicoating on Bond Strength between Titanium and Porcelain
TAMAÇ E. , KÜMBÜLOĞLU T. Ö. , TOKSAVUL S. , TOMAN M. , SARIKANAT M.
NIGERIAN JOURNAL OF CLINICAL PRACTICE, vol.21, no.9, pp.1177-1181, 2018 (Journal Indexed in SCI)
2018
2018Effect of Diatomite Weight Fraction on Morphology, Thermal and Physical Properties of Diatomite Filled High Density Polyethylene Composites
Sever K., Atagur M., ALTAY L. , Seki Y., UYSALMAN T., SEN I., et al.
ACTA PHYSICA POLONICA A, vol.134, no.1, pp.281-284, 2018 (Journal Indexed in SCI)
2018
2018Thermal, Electrical, and Mechanical Properties of Various Thermal Conductive Powder Filled Polyamide 6 Composite Materials for Thermal Management Applications
Altay L. , Seki Y., Sever K., Sen I., Uysalman T., Atagur M., et al.
ACTA PHYSICA POLONICA A, vol.134, pp.200-203, 2018 (Journal Indexed in SCI)
2018
2018Effect of Compatibilizer on Morphology, Thermal and Mechanical Properties of Recycled Carbon Fiber Reinforced Polypropylene Composites
Altay L. , Seki Y., Sever K., Sen I., Uysalman T., Atagur M., et al.
ACTA PHYSICA POLONICA A, vol.134, pp.196-199, 2018 (Journal Indexed in SCI)
2018
2018Characterization and analysis of motion mechanism of electroactive chitosan-based actuator
Altinkaya E., Seki Y., Cetin L., GÜRSES B. O. , Ozdemir O., Sever K., et al.
CARBOHYDRATE POLYMERS, vol.181, pp.404-411, 2018 (Journal Indexed in SCI)
2017
2017Effect of final irrigation procedures on fracture resistance of root filled teeth: an exvivo study
TURK T., KAVAL M. E. , SARIKANAT M. , HUELSMANN M.
INTERNATIONAL ENDODONTIC JOURNAL, vol.50, no.8, pp.799-804, 2017 (Journal Indexed in SCI)
2017
2017Electromechanical characterization of multilayer graphene-reinforced cellulose composite containing 1-ethyl-3-methylimidazolium diethylphosphonate ionic liquid
Akar E., Seki Y., Ozdemir O., Sen I., SARIKANAT M. , GÜRSES B. O. , et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, vol.24, no.2, pp.289-295, 2017 (Journal Indexed in SCI)
2016
2016Manufacturing and mechanical, thermal and electrical characterization of graphene loaded chitosan composites
YENİER Z. , Seki Y., SEN I., Sever K., MERMER O., SARIKANAT M.
COMPOSITES PART B-ENGINEERING, vol.98, pp.281-287, 2016 (Journal Indexed in SCI)
2016
2016AN ECOLOGICAL APPROACH FOR THE SURFACE MODIFICATION OF ARAMID FIBERS
Demir A. , Bozacı E. , Gülümser T. , Sarıkanat M.
TEKSTIL VE KONFEKSIYON, vol.26, pp.256-261, 2016 (Journal Indexed in SCI)
2016
2016Electromechanical performance of chitosan-based composite electroactive actuators
Altinkaya E., Seki Y., Yilmaz O. C. , Cetin L., Ozdemir O., Sen I., et al.
COMPOSITES SCIENCE AND TECHNOLOGY, vol.129, pp.108-115, 2016 (Journal Indexed in SCI)
2016
2016Evaluation of linden fibre as a potential reinforcement material for polymer composites
Seki Y., Seki Y., SARIKANAT M. , Sever K., Durmuskahya C., BOZACI E.
JOURNAL OF INDUSTRIAL TEXTILES, vol.45, no.6, pp.1221-1238, 2016 (Journal Indexed in SCI)
2016
2016The effect of argon and air plasma treatment of flax fiber on mechanical properties of reinforced polyester composite
SARIKANAT M. , Seki Y., Sever K., BOZACI E. , DEMİR A. , ÖZDOĞAN E.
JOURNAL OF INDUSTRIAL TEXTILES, vol.45, no.6, pp.1252-1267, 2016 (Journal Indexed in SCI)
2016
2016Manufacturing and characterization of vine stem reinforced high density polyethylene composites
Kilinc A. C. , Atagur M., Ozdemir O., SEN I., Kucukdogan N., Sever K., et al.
COMPOSITES PART B-ENGINEERING, vol.91, pp.267-274, 2016 (Journal Indexed in SCI)
2016
2016The investigation of antistatic effects of 1-ethyl-2,3-dimethylimidazolium ethyl sulphate for acrylic-based polymer film
Seki Y., Yildiz N., Ince M., SENGUL S., Sever K., SARIKANAT M. , et al.
PLASTICS RUBBER AND COMPOSITES, vol.45, no.8, pp.362-367, 2016 (Journal Indexed in SCI)
2015
2015Improvement of the electromechanical performance of carboxymethylcellulose-based actuators by graphene nanoplatelet loading
Ozdemir O., Karakuzu R., SARIKANAT M. , Seki Y., Akar E., Cetin L., et al.
CELLULOSE, vol.22, no.5, pp.3251-3260, 2015 (Journal Indexed in SCI)
2015
2015Three-dimensional finite element analysis of stress distribution of two-retainer and single-retainer all-ceramic resin-bonded fixed partial dentures
TOMAN M. , TOKSAVUL S. , SABANCI S. , KIRAN B., Dikici S., SARIKANAT M. , et al.
QUINTESSENCE INTERNATIONAL, vol.46, no.8, pp.691-696, 2015 (Journal Indexed in SCI)
2015
2015Effects of PEG loading on electromechanical behavior of cellulose-based electroactive composite
Ozdemir O., Karakuzu R., SARIKANAT M. , Akar E., Seki Y., Cetin L., et al.
CELLULOSE, vol.22, no.3, pp.1873-1881, 2015 (Journal Indexed in SCI)
2015
2015Electroactive behavior of graphene nanoplatelets loaded cellulose composite actuators
Sen I., Seki Y., SARIKANAT M. , Cetin L., Gurses B. O. , Ozdemir O., et al.
COMPOSITES PART B-ENGINEERING, vol.69, pp.369-377, 2015 (Journal Indexed in SCI)
2014
2014Sodium tungstate alleviates biomechanical properties of diabetic rat femur via modulation of oxidative stress
DÖNMEZ B., Ozturk N., SARIKANAT M. , OĞUZ N., SARI R., ÖZDEMİR S.
GENERAL PHYSIOLOGY AND BIOPHYSICS, vol.33, no.4, pp.443-452, 2014 (Journal Indexed in SCI)
2014
2014Investigation of the effects of PWM parameters on ionic polymer metal composite actuators
Yilmaz O. C. , Cetin L., GÜRSES B. O. , Sen I., Ozdemir O., SARIKANAT M. , et al.
SMART MATERIALS AND STRUCTURES, vol.23, no.9, 2014 (Journal Indexed in SCI)
2014
2014Preparation and Properties of Rice Husk-Filled Plasticized Wheat Gluten Biocomposites
EMADI S., Seki Y., Sever K., SARIKANAT M.
POLYMER ENGINEERING AND SCIENCE, vol.54, no.7, pp.1477-1483, 2014 (Journal Indexed in SCI)
2014
2014Physical and mechanical properties of randomly oriented coir fiber-cementitious composites
Andic-Cakir O. , SARIKANAT M. , TUFEKCI H. B. , DEMIRCI C., Erdogan U. H.
COMPOSITES PART B-ENGINEERING, vol.61, pp.49-54, 2014 (Journal Indexed in SCI)
2014
2014Effect of chlorhexidine on bond strength between glass-fiber post and root canal dentine after six month of water storage.
Toman M. , Toksavul S. , TAMAÇ E. , SARIKANAT M. , KARAGÖZOĞLU I.
The European journal of prosthodontics and restorative dentistry, vol.22, pp.29-34, 2014 (Journal Indexed in SCI Expanded)
2014
2014Determination of properties of Althaea officinalis L. (Marshmallow) fibres as a potential plant fibre in polymeric composite materials
SARIKANAT M. , Seki Y., Sever K., Durmuskahya C.
COMPOSITES PART B-ENGINEERING, vol.57, pp.180-186, 2014 (Journal Indexed in SCI)
2013
2013Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber-matrix for composite materials
BOZACI E. , Sever K., SARIKANAT M. , Seki Y., DEMİR A. , ÖZDOĞAN E. , et al.
COMPOSITES PART B-ENGINEERING, vol.45, no.1, pp.565-572, 2013 (Journal Indexed in SCI)
2013
2013Effect of huntite mineral on mechanical, thermal and morphological properties of polyester matrix
Seki Y., Sever K., SARIKANAT M. , Sakarya A., Elik E.
COMPOSITES PART B-ENGINEERING, vol.45, no.1, pp.1534-1540, 2013 (Journal Indexed in SCI)
2013
2013Extraction and properties of Ferula communis (chakshir) fibers as novel reinforcement for composites materials
Seki Y., Sarikanat M. , Sever K., Durmuskahya C.
COMPOSITES PART B-ENGINEERING, vol.44, no.1, pp.517-523, 2013 (Journal Indexed in SCI)
2012
2012Variations of mechanical properties of jute/polyester composite aged in various media
Sen I., ARAL A., Seki Y., SARIKANAT M. , Sever K.
JOURNAL OF COMPOSITE MATERIALS, vol.46, no.18, pp.2219-2225, 2012 (Journal Indexed in SCI)
2012
2012Fracture Resistance and Analysis of Stress Distribution of Implant-Supported Single Zirconium Ceramic Coping Combination with Abutments Made of Different Materials
FIRIDINOGLU K., TOKSAVUL S. , TOMAN M. , SARIKANAT M. , NERGİZ İ.
JOURNAL OF APPLIED BIOMECHANICS, vol.28, no.4, pp.394-399, 2012 (Journal Indexed in SCI)
2012
2012Effect of siloxane treatment of jute fabric on the mechanical and thermal properties of jute/HDPE
Seki Y., SARIKANAT M. , Ezan M. A.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, vol.31, no.15, pp.1009-1016, 2012 (Journal Indexed in SCI)
2012
2012Effect of angiotensin II type 1 receptor blocker on osteoporotic rat femurs
Donmez B. O. , ÖZDEMİR S., SARIKANAT M. , YARAŞ N., Koc P., DEMİR N., et al.
PHARMACOLOGICAL REPORTS, vol.64, no.4, pp.878-888, 2012 (Journal Indexed in SCI)
2012
2012Mechanical Anisotropy in Unidirectional Glass Fabric Reinforced Oligomeric Siloxane Modified Polyester Composites
SARIKANAT M. , Sever K., Seki Y., Tavman I. H.
FIBERS AND POLYMERS, vol.13, no.6, pp.775-781, 2012 (Journal Indexed in SCI)
2012
2012Effects of conductive graphite filler loading on physical properties of high-density polyethylene composite
Tavman I., KRUPA I., OMASTOVA M., SARIKANAT M. , NOVAK I., Sever K., et al.
POLYMER COMPOSITES, vol.33, no.7, pp.1071-1076, 2012 (Journal Indexed in SCI)
2012
2012Characterization of Luffa cylindrica Fibers and the Effect of Water Aging on the Mechanical Properties of Its Composite with Polyester
Seki Y., Sever K., ERDEN S. , SARIKANAT M. , Neser G., Ozes C.
JOURNAL OF APPLIED POLYMER SCIENCE, vol.123, no.4, pp.2330-2337, 2012 (Journal Indexed in SCI)
2012
2012Surface treatments of jute fabric: The influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester composites
Sever K., SARIKANAT M. , Seki Y., Erkan G., Erdogan U. H. , ERDEN S.
INDUSTRIAL CROPS AND PRODUCTS, vol.35, no.1, pp.22-30, 2012 (Journal Indexed in SCI)
2011
2011Oxygen plasma treatments of jute fibers in improving the mechanical properties of jute/HDPE composites
Sever K., ERDEN S. , Gulec H. A. , Seki Y., SARIKANAT M.
MATERIALS CHEMISTRY AND PHYSICS, vol.129, pp.275-280, 2011 (Journal Indexed in SCI)
2011
2011Effect of the Atmospheric Plasma Treatment Parameters on Jute Fabric: The Effect on Mechanical Properties of Jute Fabric/Polyester Composites
Demir A. , Seki Y., Bozacı E. , Sarıkanat M. , Erden S. , Sever K., et al.
JOURNAL OF APPLIED POLYMER SCIENCE, vol.121, no.2, pp.634-638, 2011 (Journal Indexed in SCI)
2011
2011Determination of bone density distribution in proximal femur by using the 3D orthotropic bone adaptation model
Sarikanat M. , YILDIZ H.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, vol.225, pp.365-375, 2011 (Journal Indexed in SCI)
2011
2011An experimental investigation on the low velocity impact response of composite plates repaired by VARIM and hand lay-up processes
Atas C., Akgun Y., Dagdelen O., Icten B. M. , SARIKANAT M.
COMPOSITE STRUCTURES, vol.93, no.3, pp.1178-1186, 2011 (Journal Indexed in SCI)
2010
2010Effect of the Low and Radio Frequency Oxygen Plasma Treatment of Jute Fiber on Mechanical Properties of Jute Fiber/Polyester Composite
Seki Y., SARIKANAT M. , SEVER K., ERDEN S. , Gulec H. A.
FIBERS AND POLYMERS, vol.11, no.8, pp.1159-1164, 2010 (Journal Indexed in SCI)
2010
2010Enhancement of the Mechanical Properties of Glass/polyester Composites via Matrix Modification Glass/polyester Composite Siloxane Matrix Modification
ERDEN S. , Sever K., Seki Y., SARIKANAT M.
FIBERS AND POLYMERS, vol.11, no.5, pp.732-737, 2010 (Journal Indexed in SCI)
2010
2010The Mechanical Properties of gamma-Methacryloxypropyltrimethoxy silane-treated Jute/Polyester Composites
Sever K., SARIKANAT M. , Sekai Y., Erkan G., Erdogan U. H.
JOURNAL OF COMPOSITE MATERIALS, vol.44, no.15, pp.1913-1924, 2010 (Journal Indexed in SCI)
2010
2010The Influence of Oligomeric Siloxane Concentration on the Mechanical Behaviors of Alkalized Jute/Modified Epoxy Composites
Sarikanat M.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, vol.29, no.6, pp.807-817, 2010 (Journal Indexed in SCI)
2010
2010Fracture resistance of endodontically treated teeth: effect of tooth coloured post material and surface conditioning.
Toman M. , Toksavul S. , Sarikanat M. , Nergiz I., Schmage P.
The European journal of prosthodontics and restorative dentistry, vol.18, pp.23-30, 2010 (Journal Indexed in SCI Expanded)
2010
2010Improvement of Interfacial Adhesion of Glass Fiber/Epoxy Composite by Using Plasma Polymerized Glass Fibers
Sever K., SARIKANAT M. , Seki Y., Gulec H. A. , Mutlu M., Tavman I. H.
JOURNAL OF ADHESION, vol.86, no.9, pp.913-936, 2010 (Journal Indexed in SCI)
2009
2009A biomechanical study on preloaded compression effect on headless screws
Baran O., Sagol E., Oflaz H., SARIKANAT M. , Havitcioglu H.
ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY, vol.129, no.12, pp.1601-1605, 2009 (Journal Indexed in SCI)
2009
2009Effect of the Atmospheric Plasma Treatment Parameters on Surface and Mechanical Properties of Jute Fabric
BOZACI E. , Sever K., DEMİR A. , Seki Y., SARIKANAT M. , ÖZDOĞAN E.
FIBERS AND POLYMERS, vol.10, no.6, pp.781-786, 2009 (Journal Indexed in SCI)
2009
2009The evaluation of displacement resistance of glass FRC posts to root dentine using a thin slice push-out test
TOMAN M. , TOKSAVUL S. , SARIKANAT M. , FIRIDINOGLU K., AKIN A.
INTERNATIONAL ENDODONTIC JOURNAL, vol.42, no.9, pp.802-810, 2009 (Journal Indexed in SCI)
2009
2009Concentration Effect of gamma-Glycidoxypropyl-trimethoxysilane on the Mechanical Properties of Glass Fiber-Epoxy Composites
Sever K., SARIKANAT M. , Seki Y., Tavman I. H.
POLYMER COMPOSITES, vol.30, no.9, pp.1251-1257, 2009 (Journal Indexed in SCI)
2009
2009Preparation and characterization of thin films by plasma polymerization of glycidoxypropyltrimethoxysilane at different plasma powers and exposure times
Sever K., Seki Y., Gulec H. A. , SARIKANAT M. , Mutlu M., Tavman I.
APPLIED SURFACE SCIENCE, vol.255, no.20, pp.8450-8457, 2009 (Journal Indexed in SCI)
2008
2008Comparison of mechanical properties of epoxy composites reinforced with stitched glass and carbon fabrics: Characterization of mechanical anisotropy in composites and investigation on the interaction between fiber and epoxy matrix
Cecen V., SARIKANAT M. , YILDIZ H. , Tavman I. H.
POLYMER COMPOSITES, vol.29, no.8, pp.840-853, 2008 (Journal Indexed in SCI)
2008
2008Experimental characterization and morphology investigation of composites based on high-density and low-density polyethylene reinforced with non-crimp-stitched glass fabrics
SARIKANAT M. , Cecen V., ERDEN S. , BALTACI A.
POLYMER COMPOSITES, vol.29, no.8, pp.939-948, 2008 (Journal Indexed in SCI)
2008
2008Effects of fiber surface treatments on mechanical properties of epoxy composites reinforced with glass fabric
Sever K., SARIKANAT M. , Seki Y., Cecen V., Tavman I. H.
JOURNAL OF MATERIALS SCIENCE, vol.43, no.13, pp.4666-4672, 2008 (Journal Indexed in SCI)
2008
2008FTIR and SEM analysis of polyester- and epoxy-based composites manufactured by VARTM process
Cecen V., Seki Y., SARIKANAT M. , Tavman I. H.
JOURNAL OF APPLIED POLYMER SCIENCE, vol.108, no.4, pp.2163-2170, 2008 (Journal Indexed in SCI)
2008
2008Polyester composites reinforced with noncrimp stitched glass fabrics: Experimental characterization of composites and investigation on the interaction between glass fiber and polyester matrix
Cecen V., SARIKANAT M. , Seki Y., YILDIZ H. , Tavman I. H.
POLYMER COMPOSITES, vol.29, no.3, pp.262-273, 2008 (Journal Indexed in SCI)
2008
2008Experimental characterization of traditional composites manufactured by vacuum-assisted resin-transfer molding
Cecen V., SARIKANAT M.
JOURNAL OF APPLIED POLYMER SCIENCE, vol.107, no.3, pp.1822-1830, 2008 (Journal Indexed in SCI)
2008
2008The effect of spreader size on fracture resistance of maxillary incisor roots
Piskin B. , AYDIN B., Sarikanat M.
INTERNATIONAL ENDODONTIC JOURNAL, vol.41, no.1, pp.54-59, 2008 (Journal Indexed in SCI)
2007
2007Static stability of laminated composite circular plates with holes using shear deformation theory
Baltaci A. , Sarikanat M. , Yildiz H.
FINITE ELEMENTS IN ANALYSIS AND DESIGN, vol.43, pp.839-846, 2007 (Journal Indexed in SCI)
2006
2006Polyester composites reinforced with noncrimp stitched carbon fabrics: Mechanical characterization of composites and investigation on the interaction between polyester and carbon fiber
ÇEÇEN V., Sarikanat M. , SEKİ Y., GOVSA T., Yildiz H. , TAVMAN I. H.
JOURNAL OF APPLIED POLYMER SCIENCE, vol.102, no.5, pp.4554-4564, 2006 (Journal Indexed in SCI)
2006
2006Determination of the effects of axial load on the natural frequency of a composite beam with the finite element method
Sarikanat M. , Yildiz H. , Baltaci A.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, vol.25, no.11, pp.1165-1172, 2006 (Journal Indexed in SCI)
2006
2006Buckling analysis of laminated composite circular plates with holes
Baltaci A. , Sarikanat M. , Yildiz H.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, vol.25, no.7, pp.733-744, 2006 (Journal Indexed in SCI)
2001
2001Finite-element analysis of thick composite beams and plates
Yildiz H. , Sarikanat M.
COMPOSITES SCIENCE AND TECHNOLOGY, vol.61, no.12, pp.1723-1727, 2001 (Journal Indexed in SCI)
Articles Published in Other Journals
2022
2022Production and characterization of thermo-mechanical properties of hydroxyapatitefilled polycarbonatecomposite filaments for FDM printing
Sarıkanat M. , Altay L. , Seki Y., Leşkeri B. M. , Uysalman T.
Journal of Additive Manufacturing Technologies, vol.1, no.3, pp.588-598, 2022 (Refereed Journals of Other Institutions)
2021
2021The Effect of Various Mineral Fillers on Thermal, Mechanical, and Rheological Properties of Polypropylene
Altay L. , Sarıkanat M. , Sağlam M., Uysalman T., Seki Y.
Research on Engineering Structures and Materials, vol.1, no.1, pp.1-16, 2021 (Refereed Journals of Other Institutions)
2020
2020Kağıt üretim atığı katkılı yüksek yoğunluklu polietilen (yype)kompozitlerin mekanik özelliklerinin incelenmesi
Küçükdoğan N., Halis S., Sütçü M., Sarıkanat M. , Seki Y., Sever K.
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol.23, no.8, pp.949-953, 2020 (Journal Indexed in ESCI)
2020
2020Improvement of Thermal Isulation Properties of Polyurethane by Silica-Based Particles
Akdemir Ö. , Hacırecepoğlu A., Andiç Çakır Ö. , Sarıkanat M. , Sever K., Seki Y.
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, vol.22, no.64, pp.147-153, 2020 (National Refreed University Journal)
2019
2019Grafen Nanoplaka Takviyeli Ultra Yüksek Molekül Ağırlıklı Polietilen Tabanlı Nano-Kompozit Malzeme Geliştirilmesi ve Karakterizasyonu
ALTAY L. , ATAGÜR M., Erbektaş M., SARIKANAT M.
Deu Muhendislik Fakultesi Fen ve Muhendislik, vol.21, pp.323-330, 2019 (Other Refereed National Journals)
2019
2019Grafit Nanoplaka Takviyeli Ultra Yüksek Molekül Ağırlıklı Polietilen Tabanlı Nano-Kompozit Malzeme Geliştirilmesi ve Karakterizasyonu
ALTAY L. , Atagür M., ERBEKTAŞ M., SARIKANAT M.
Dokuz Eylül Üniversitesi Fen ve Mühendislik Dergisi, vol.2, no.2, pp.1-10, 2019 (National Refreed University Journal)
2019
2019Karbon Lif Yüzey Modifikasyonunun Karbon Lif ve Karbon Lif Takviyeli Kompozit Malzemelerin Özelliklerine Etkilerinin İncelenmesi
ALTAY L. , SARIKANAT M.
Tekstil ve Mühendis, vol.26, no.113, pp.25-32, 2019 (Other Refereed National Journals)
2018
2018Evaluation of synergistic effect of borax decahydrate on flame retardancy of polypropylene
SEKİ Y., SARIKANAT M. , ALTAY L. , UYSALMAN T., SEVİĞ TANTUĞ G., İŞBİLİR A.
International Journal of Scientfic and Engineering Research, vol.9, pp.56-59, 2018 (Refereed Journals of Other Institutions)
2016
2016Waste glass aggregate for cementitious and polymer concrete
Andic-Cakir O. , UZUM O., YÜKSEL C. , SARIKANAT M.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS, vol.169, no.2, pp.106-116, 2016 (Journal Indexed in ESCI)
2014
2014Silindirik Slotlu Elektromanyetik Sönümleyicinin Optimal Tasarımı
BALTACI A. , BOZTEPE M. , GÜRSES B. O. , SABANCI S. , SARIKANAT M.
Makine Teknolojileri Elektronik Dergisi (elektronik), vol.11, pp.11-18, 2014 (Other Refereed National Journals)
2013
2013Karbon Elyaf Takviyeli Prepreg Kompozitlerde Arayüzey Mekaniğinin Karbon Nanoyapı Katkısıyla İyileştirilmesi
ACAR V., AKBULUT H., SARIKANAT M. , SEYDİBEYOĞLU M. Ö. , SEKİ Y., ERDEN S.
Makine Teknolojileri Elektronik Dergisi (elektronik), 2013 (Other Refereed National Journals)
2011
2011Aramid ve karbon lif takviyeli termoplastik kompozit kirişlerin impuls girdi altındaki titreşim davranışları
BALTACI A. , SARIKANAT M. , TURAN M.
Tekstil ve Mühendis, vol.18, pp.1-7, 2011 (Other Refereed National Journals)
2011
2011Preparation and mechanical properties of graphite filled HDPE nanocomposites
SARIKANAT M. , SEVER K., ERBAY E., GÜNER F., TAVMAN İ. H. , TURGUT A., et al.
Archives of Materials Science and Engineering, vol.50, pp.120-124, 2011 (Refereed Journals of Other Institutions)
2011
2011Üç Kutuplu Aktif Manyetik Yatağın Kuvvet Analizi
BALTACI A. , GÜRSES B. O. , EKMEKÇİ S., SARIKANAT M. , BOZTEPE M.
Makine Teknolojileri Elektronik Dergisi, vol.8, pp.39-48, 2011 (Other Refereed National Journals)
2010
2010Effect of noble metal alloy post and core material on the fracture resistance of endodontically treated teeth
TOKSAVUL S. , TOMAN M. , SARIKANAT M. , NERGİZ İ., SCHMAGE P.
The European journal of prosthodontics and restorative dentistry, vol.18, pp.2-7, 2010 (Refereed Journals of Other Institutions)
2009
2009Karbon Fiber Takviyeli Termoplastik Kompozitlerde Ara Yüzey Dayanımının Arttırılmasında Kullanılan Yöntemler
ERDEN S. , SARIKANAT M. , YILDIZ H.
Tekstil Teknolojileri Elektronik Dergisi, 2009 (Other Refereed National Journals)
2000
2000Kalın kompozit kiriş ve levhaların sonlu elemanlar yöntemiyle analiz
YILDIZ H. , SARIKANAT M.
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol.6, pp.147-153, 2000 (Other Refereed National Journals)
Refereed Congress / Symposium Publications in Proceedings
2019
2019Influence of Film Thickness on Electromechanical Properties of Cellulose-Graphene Ionic Polymer Composite Films
AKBÜLBÜL Ö., Şener M., GÜRSES B. O. , SARIKANAT M. , BALTACI A.
THERMAM 2019, 22 - 24 September 2019
2019
2019Investigation of thermal and mechanical properties of synthetic graphite PBT composites
Altay L. , Sarıkanat M. , Seki Y.
Thermophysical and Mechanical Properties of Advanced Materials THERMAM2019, İzmir, Turkey, 22 - 24 September 2019
2019
2019Thermal and Mechanical Behaviour of Graphene Loaded Graphite/PPS Composites
Altay L. , Sarıkanat M.
Thermophysical and Mechanical Properties of Advanced Materials THERMAM2019, İzmir, Turkey, 22 - 24 September 2019
2019
2019Development of Energy Efficiency High Polymeric Composite Material for Building Applications
Altay L. , Sarıkanat M.
Thermophysical and Mechanical Properties of Advanced Materials THERMAM2019, İzmir, Turkey, 22 - 24 September 2019, pp.44
2019
2019Effect of Iron Powder on Mechanical and Thermal Properties of Polyester Based Composites
GÜLEN S., ALTAY L. , SARIKANAT M. , YENİER Z.
Thermophysical and Mechanical Properties of Advanced Materials THERMAM2019, İzmir, Turkey, 22 - 24 September 2019, pp.46
2019
2019Determination of Thermal Conductivity of Carbon Filled Polymeric Composite Platesfor Compact Plate Heat Exchangers
Gülen S., Altay L. , Sarıkanat M.
Thermophysical and Mechanical Properties of Advanced Materials THERMAM2019, İzmir, Turkey, 22 - 24 September 2019
2019
2019Investigation of Thermal, Mechanical and Flame Retardance Properties of Flame Retarded Polyamide Composites for Railway Applications
Altay L. , Sarıkanat M. , Seki Y.
Thermophysical and Mechanical Properties of Advanced Materials THERMAM2019, İzmir, Turkey, 22 - 24 September 2019
2019
2019Determination of Thermal Conductivity of Carbon Filled Polymeric Composite Plates for Compact Plate Heat Exchangers
Güven A., Akdemir Ö. , Çoban M. T. , Atagür M., Seki Y., Sever K., et al.
6th International Conference on Thermophysical and Mechanical Properties of Advanced Materials 8th Rostocker Symposium on Thermophysical Properties for Technical Thermodynamics, İzmir, Turkey, 22 - 24 September 2019, pp.37
2019
2019Polymeric Heat Sink Design for Thermal Management Applications
ALTAY L. , GÜLEN S., SEKİ Y., SARIKANAT M.
Recent Advances in Mathematical and Engineering Sciences RAIMS, Lviv, Ukraine, 24 - 26 July 2019
2019
2019Effect of Carbon Fiber Orientation on Thermal Conductivity of Carbon Fiber Reinforced Polymeric Composites
ALTAY L. , GÜLEN S., SEKİ Y., SARIKANAT M.
Recent Advances in Mathematical and Engineering Sciences RAIMS, Lviv, Ukraine, 24 - 26 July 2019
2019
2019Blending of Poly (Phenylene Sulfide) with Syndiotactic Polystyrene
Seki Y., Altay L. , Sarıkanat M.
Recent Advances in Mathematical and Engineering Sciences RAIMS, Lviv, Ukraine, 24 - 26 July 2019
2019
2019Thermal Conductivity and Mechanical Properties of Synthetic Graphite Loaded Polyphenylene Sulfide Composites
SEVİĞ TANTUĞ G., SEKİ Y., SARIKANAT M. , ALTAY L. , GÜLEN S., İŞBİLİR A.
35th INTERNATIONAL CONFERENCE of THE POLYMER PROCESSING SOCIETY PPS-35, İzmir, Turkey, 26 - 30 May 2019
2018
2018Effect Of Phase Change Materials On Thermal And Mechanical Properties Of Polypropylene
Altay L. , Seki Y., Özkaya M., Seviğ Tantuğ G., İsbilir A., Sarıkanat M.
5th INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2018), Antalya, Türkiye, 12 - 16 Ekim 2018, Antalya, Turkey, 12 - 16 October 2018
2018
2018Preparation and Characterization of Polypropylene Containing Thermal Energy Storage Materials for Cooling Application
Altay L. , Seki Y., Özkaya M., Tantuğ G. S. , İşbilir A., Sarıkanat M.
ICCESEN2018 5th International Conference on Computational and Experimental Science and Engineering (ICCESEN2018), Antalya, Turkey, 12 - 16 October 2018, pp.388
2018
2018The Effect of Various Mineral Fillers on Rheological and Mechanical Properties of Polypropylene
SARIKANAT M. , ALTAY L. , UYSALMAN T., AKDENİZ A., HÜNDÜR E. Y. , Özkaya M., et al.
5thINTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING(ICCESEN-2018), 12 - 16 October 2018
2018
2018Effects of Carbon Fiber Surface Treatments and Sizing on Carbon Fiber Surface and Mechanical Properties of Unidirectional Carbon Fiber Prepreg Reinforced Epoxy Composite
Yenier Z. , Altay L. , Sarıkanat M.
5th INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2018), Antalya, Turkey, 12 - 16 October 2018
2018
2018EFFECT OF SYNTHETIC GRAPHITE AS A THERMALCONDUCTIVE FILLER ON THERMAL AND MECHANICALPROPERTIES OF POLYAMIDE 4.6 BASED COMPOSITEMATERIALS
Gülen S., Altay L. , Seki Y., Sarıkanat M. , Seviğ Tantuğ G., Sever K.
IV. International Ege Composite Materials Symposium (KOMPEGE 2018), İzmir, Turkey, 6 - 08 October 2018, pp.30
2018
2018ENHANCED THERMAL AND ELECTRICAL CONDUCTIVITY OF EPOXY COMPOSITES FILLED WITH SYNTHETIC GRAPHITE
Kırcalı M. C. , Atalan O., Sarıkanat M. , Altay L. , Seki Y.
IV. International Ege Composite Materials Symposium(KOMPEGE 2018), İzmir, Turkey, 6 - 08 October 2018, pp.34
2018
2018INVESTIGATION ON MECHANICAL, VISCOELASTIC, ANDTHERMAL PROPERTIES OF TERNARY CARBON (CARBONFIBER/GRAPHITE/ MULTIWALLED CARBON NANOTUBES)FILLED POLYPROPYLENE COMPOSITES
Atagür M., Sever K., Altay L. , Seki Y., Seydibeyoğlu M. Ö. , Sarıkanat M.
IV. International Ege Composite Materials Symposium (KOMPEGE 2018), İzmir, Turkey, 6 - 08 October 2018
2018
2018Polyethylene Filled with Almond Shells Particles: Mechanical and Thermal Properties
Güven A., Atagür M., Altay L. , Seki Y., Uysalman T., Seviğ Tantuğ G., et al.
8th International Advances in Applied Physics and Materials Science Congress Exhibition (APMAS2018) , Muğla, Turkey, 24 - 30 April 2018, pp.142
2018
2018EVALUATION OF SYNERGISTIC EFFECT OF BORAX DECAHYDRATE ON FLAME RETARDANCY OF POLYPROPYLENE
SEKİ Y., SARIKANAT M. , ALTAY L. , UYSALMAN T., SEVİĞ TANTUĞ G., İŞBİLİR A.
3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), 17 - 21 July 2018, pp.106
2018
2018INVESTIGATION OF THERMAL PROPERTIES OF SYNTHETIC AND NATURAL GRAPHITE FILLED POLYAMIDE COMPOSITES
ALTAY L. , SEKİ Y., UYSALMAN T., SEVİĞ TANTUĞ G., İŞBİLİR A., SARIKANAT M.
3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), 17 - 21 July 2018, pp.178
2018
2018COMPARISON OF BARITE AND COLEMANITE LOADED POLYPROPYLENE COMPOSITES IN TERMS OF SOUND TRANSMISSION LOSS
SARIKANAT M. , ALTAY L. , Özkaya M., SEÇGİN A., İŞBİLİR A., SEKİ Y.
3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), 17 - 21 July 2018, pp.192
2018
2018FACTORS AFFECTING THE MECHANICAL AND THERMAL PERFORMANCE OF NATURAL FIBER FILLED POLYPROPYLENE COMPOSITES FOR AUTOMOTIVE APPLICATIONS
UYSALMAN T., BOZACI E. , ŞENALTUN M., ÇAPAN U., ÇÖL A., GİRGİNER B., et al.
9th International Automotive Technologies Congress, OTEKON 2018, 7 - 08 May 2018, pp.817-824
2018
2018Effect of Ulexite on Mechanical, Thermal Properties and Flame Retardancy of Polypropylene
ALTAY L. , SEKİ Y., UYSALMAN T., SEVİĞ TANTUĞ G., İŞBİLİR A., SARIKANAT M.
8th International Advances in Applied Physics and Materials Science Congress Exhibition, 24 - 30 April 2018
2018
2018The Effect of Various Minerals on Sound Absorption and Other Properties of Polypropylene
Sarıkanat M. , Seçgin A., Uysalman T., Seviğ Tantuğ G., Özkaya M., Atagür M., et al.
8th International Advances in Applied Physics and Materials Science Congress Exhibition (APMAS2018), Muğla, Turkey, 24 - 30 April 2018, pp.145
2018
2018Investigation of the Effects of Boron Derivative Ulexite on the Properties of Polyurethane Based Composite Materials for Insulation
Gürlek G. , Altay L. , Sarıkanat M.
8th International Advances in Applied Physics and Materials Science Congress Exhibition (APMAS2018), Muğla, Turkey, 24 - 30 April 2018, pp.108
2017
2017Experimental and Numerical Study on The Flow and Thermal Distribution of The Freezer
DEVECİ D. C. , ALTAY L. , SARIKANAT M.
1. International University Industry Cooperation,RD And Innovation Congress, 18 - 19 December 2017
2017
2017Numerical Analysis of Heat Distribution in Heat Sinks Using Thermally Conductive Polymeric Composites
GÜVEN A., GÜRSES B. O. , ALTAY L. , SARIKANAT M.
20th International Conference on Composite Structures (ICCS20), Paris, France, 4 - 06 September 2017
2017
2017Effects of injection molding parameters on thermal conductivity of carbon filled polymeric composites
ALTAY L. , GÜRSES B. O. , GÜVEN A., SARIKANAT M.
20th International Conference on Composite Structures (ICCS20), 4 - 06 September 2017
2017
2017Numerical Analysis Of Heat Distribution İn Heat Sinks Using Thermally Conductive Polymeric Composites
GÜVEN A., GÜRSES B. O. , ALTAY L. , SARIKANAT M.
20th International Conference On Composite Structures, 4 September - 07 December 2017
2017
2017The Effect Of Atmospheric Plasma Treatments On Mechanical Properties of Recycled Carbon Fiber Reinforced Polypropyene
Altay L., Bozacı E. , Atagür M., Sever K., Seki Y., Seviğ G., et al.
The Twenty-Fifth Annual InternationalConference on Composites/Nano Engineering, Rome, Italy, 16 - 22 July 2017
2017
2017Investigation of Mechanical and Thermal Properties of Pumice Powder Filled Polypropylene Composites
SEVER K., ATAGÜR M., TUNÇALP M., SEKİ Y., ALTAY L. , SARIKANAT M.
The 25th annual international conference on composites/nanoengineering (ICCE-25), 16 - 22 July 2017
2017
2017Utilization of agricultural waste fillers in polypropylene based composites
SARIKANAT M. , ALTAY L. , ATAGÜR M., AKYÜZ O., SEKİ Y., AYCAN Y., et al.
The 25th annual international conference on composites/nanoengineering (ICCE-25), 16 - 22 July 2017
2017
2017The Effect of Atmospheric Plasma Treatments on Mechanical Properties of Recycled Carbon Fiber Reinforced Polypropylene Composites
ALTAY L. , BOZACI E., ATAGÜR M., SEVER K., SEKİ Y., SEVİĞ G., et al.
The 25th annual international conference on composites/nanoengineering (ICCE-25), 16 - 22 July 2017
2017
2017The Effect of Hybrid Carbon Fillers on Thermal and Mechanical Properties of PP Based Composites
ATAGÜR M., AKYÜZ O., SEVER K., SEKİ Y., ALTAY L. , SEYDİBEYOĞLU M. Ö. , et al.
The 25th annual international conference on composites/nanoengineering (ICCE-25), 16 - 22 July 2017
2017
2017Thermal, Electrical and Mechanical Properties of various Thermal Conductive Powder Filled Polyamide Composite Materials for Thermal Management Applications
ALTAY L. , ATAGÜR M., SEKİ Y., SEN İ., SARIKANAT M. , SEVER K., et al.
7th International Advances in Applied Physics and MaterialsScience Congress Exhibition (APMAS 2017), 22 - 26 April 2017
2017
2017Effect of Diatomite Weight Fraction on Morphology, Thermal and Physical Properties of Diatomite Filled High Density Polyethylene Composites
ATAGÜR M., SEVER K., ALTAY L. , SEKİ Y., UYSALMAN T., SEN İ., et al.
7th International Advances in Applied Physics and Materials Science Congress Exhibition, 22 - 26 April 2017
2017
2017Effect of Compatibilizer on Morphology, Thermal and Mechanical Properties of Recycled Carbon Fiber Reinforced Polypropylene Composites
ALTAY L. , ATAGÜR M., SEKİ Y., SEN İ., SARIKANAT M. , SEVER K.
7th International Advances in Applied Physics and Materials Science Congress Exhibition APMAS2017, 22 - 26 April 2017
2016
2016Fabrication and Characterization of Carbon Fiber Reinforced Polypropylene Composite Materials
SARIKANAT M. , ALTAY L. , SEKİ Y., SEVER K., SEN İ., UYSALMAN T.
6th International Conference on Materials Science and Technologies–RoMat2016, Bükreş, Romania, 09 November 2016, pp.16
2016
2016Investigation of Mechanical Properties of Diatomite Filled Polypropylene Composites
SEVER K., AKYÜZ O., ATAGÜR M., KAYA N., SEKİ Y., SARIKANAT M.
6th International Conference on Materials Science and Technologies–RoMat2016, 9 - 12 November 2016
2016
2016Ionic liquid incorporated acrylic polymer for better electrical conductivity properties
SEKİ Y., YILDIZ N., İNCE M., ERGÜL O., SEVER K., SARIKANAT M.
6th International Conference on Materials Science and Technologies–RoMat2016, 9 - 12 November 2016
2016
2016Thermal and Mechanical Characterization of Thermally Conductive Carbon Based Polymer Composite Materials
ALTAY L. , SARIKANAT M. , SEKİ Y., AKDEMİR Ö. , SEVER K., GÜRLEK G. , et al.
6th International Conference on Materials Science and Technology-ROMAT 2016, 9 - 12 November 2016
2016
2016Mechanical And Thermal Analysis Of Different Ratios Of Vermiculite PP Composites
KAYA N., ATAGÜR M., AKYÜZ O., SARIKANAT M. , SEKİ Y., SEVER K.
16th International Materials Symposium IMSP’2016, 12 - 14 October 2016
2016
2016Viscoelastic and Mechanical Properties of Olive Pomace Filled Polypropylene (PP) Composites
KAYA N., ATAGÜR M., AKYÜZ O., SEKİ Y., SARIKANAT M. , SEYDİBEYOĞLU M. Ö. , et al.
3rd International Conference On Thermophysical And Mechanical Properties Of Advanced Materials(THERMAM 2016), 1 - 03 September 2016
2016
2016Effect of pDADMAc Concentration on Electromechanical Performance of Chitosan based Electroactive Actuators
ALTINKAYA E., SEKİ Y., GÜRSES B. O. , YILMAZ Ö. C. , SARIKANAT M. , ÇETİN L., et al.
Self-Assembly in the World of Polymers, 10 - 14 July 2016
2015
2015effects of sandblasting and silicoating on bond strength between titanium and porcelain
KÜMBÜLOĞLU T. Ö. , TOKSAVUL S. , TOMAN M. , TAMAÇ E. , SARIKANAT M. , karagözoğlu i., et al.
47th meeting of the continental european division of the international association for dental researcsh, 15 - 17 October 2015
2015
2015An electromagnetic actuator for manipulation of biological samples
GÜRSES B. O. , BAYIR E. , ÇELTİKOĞLU M., ŞENDEMİR ÜRKMEZ A., IŞITMAN O., AYDIN İ., et al.
VII. International Bioengineering Congress, 19 - 21 November 2015
2015
2015Electrical and Humidity Sensing Properties of Graphene Nanocomposite Thin films
MERMER Ö., YENİER Z. , KARAYILANLI C., SEKİ Y., SARIKANAT M.
Graphene Related Technologies From Laboratory to Industry, 15 October - 16 September 2015
2015
2015Evaluation of Vine Stem Waste as a Filler Material for High Density Polyethylene
SEKİ Y., KILINÇ A. Ç. , ATAGÜR M., ÖZDEMİR O., SEN İ., SEVER K., et al.
17th International Conference on Composite Materials (ICCM 2015), 6 - 07 August 2015
2015
2015Electromechanical Behaviour of Chitosan Based Electroactive Polymer
SARIKANAT M. , AKAR E., SEN i., SEKİ Y., YILMAZ Ö. C. , GÜRSES B. O. , et al.
17th International Conference on Composite Materials (ICCM 2015), 6 - 07 August 2015
2015
2015An investigation on Viscoelastic and Electrical Properties of Biopolymer based Composites
SEVER K., SEKİ Y., YENİER Z. , SEN İ., SARIKANAT M.
17th International Conference on Composite Materials (ICCM 2015), 6 - 07 August 2015
2014
2014The Effect of Thermal Cycles on the Mechanical Properties of High Density Polyethylene (HDPE) and Graphite/HDPE composites
SEVER K., TAVMAN İ. H. , SARIKANAT M. , SEKİ Y., ÖZDEMİR İ., TURGUT A.
International Conference On Thermophysical And Mechanical Properties Of Advanced Materials(THERMAM 2014), 12 - 15 June 2014
2014
2014Film Kalınlığının İyonik Sıvı İçeren Polimer -Metal kompozit Aktuatörlerin Performansına Etkisinin İncelenmesi
ALTINKAYA E., SEKİ Y., ÖZDEMİR O., SEN İ., SARIKANAT M. , GÜRSES B. O. , et al.
15th International Materials Symposium (IMSP’xx2014), 15 - 17 October 2014
2014
2014Mekanik Germe Altında Merkezi Sinir Sistemi Nöronlarının İncelenmesi ve in vitro Bir Travmatik Beyin Hasarı Modeli
DUMAN O. M. , ÇELİK C., SARIKANAT M. , ŞENDEMİR ÜRKMEZ A.
18. Biyomedikal Mühendisliği Ulusal Toplantısı (Biyomut 2014), İstanbul, Turkey, 16 - 17 October 2014
2014
2014Electrical and Mechanical Properties of Graphene-based Cellulose Composite Films
SEN İ., SEKİ Y., SARIKANAT M. , SEVER K., GÜRSES B. O. , ÖZDEMİR O., et al.
ICCE-22: Twenty Second Annula International Conference On Composites/Nano Engineering, 13 - 19 July 2014
2014
2014The Influence of DC Voltage on Behaviour of Nafion Based Ionic Polymer Metal Composite Actuators
SEKİ Y., SEN İ., GÜRSES B. O. , ÖZDEMİR O., YILMAZ Ö. C. , ÇETİN L., et al.
ICCE-22: Twenty Second Annula International Conference On Composites/Nano Engineering, 13 - 19 July 2014
2014
2014Electromechanical Behaviour of Ionic Polymer Metal Composite Actuators under alternating-Current
SARIKANAT M. , SEN İ., YILMAZ Ö. C. , ÇETİN L., GÜRSES B. O. , SEKİ Y., et al.
ICCE-22: Twenty Second Annula International Conference On Composites/Nano Engineering, 13 - 19 July 2014
2014
2014Influence of Thermal Cycling on Tensile Properties of Expanded Graphite/High Density Polyethylene Nanocomposites
SARIKANAT M. , SEVER K., SEKİ Y., TAVMAN İ. H. , TURGUT A., ÖZDEMİR İ.
International Conference On Thermophysical And Mechanical Properties Of Advanced Materials(THERMAM 2014), 12 - 15 June 2014
2014
2014Farklı kalınlıklarda örgü fiber ile restore edilen endodontik tedavili dişlerin kırılma dayanımlarının incelenmesi Ex vivo ve sonlu elemanlar analizi çalışması
KAVAL M. E. , PEŞKERSOY C. , AYDIN B., SARIKANAT M. , SEN B. H.
12. Uluslararası Türk Endodonti Derneği Kongresi, 15 - 17 May 2014
2014
2014Investigation of Central Nervous System Neurons Under Mechanical Strain: An in vitro Traumatic Brain Injury Model
Duman O. M. , CELİK C., SARIKANAT M. , Urkmez A.
18th National Biomedical Engineering Meeting (BIYOMUT), İstanbul, Turkey, 16 - 17 October 2014
2013
2013The Concept Design of Microrobot based Surgery Robot for the Treatment of Non - communicating Hydrocephallus
GÜRSES B. O. , SABANCI S. , ÇEVİK H., ÖZBODUÇ G., ÇETİN L., BOZTEPE M. , et al.
19th International Biomedical Science and Technology Symposium (BIOMED 2013), İzmir, Turkey, 12 November 2013
2013
2013Ionic Polymer Metal Composites for Biomimetic and Biomedical Applications
SEN İ., ÖZDEMİR O., GÜRSES B. O. , AKAR E., YILMAZ Ö. C. , ÇETİN L., et al.
VIth International Bioengineering Congress (BEC2013), İzmir, Turkey, 12 November 2013, pp.43
2013
2013Effect of in vitro Mechanical Tension on Central NervousSystem Neurons
DUMAN M., SARIKANAT M. , ŞENDEMİR ÜRKMEZ A.
XIX. International Biomed Symposium, Aydın, Turkey, 12 - 15 November 2013
2013
2013Effect of in vitro Mechanical Tension on Centeral Nervous System Neurons
DUMAN M., SARIKANAT M. , ŞENDEMİR ÜRKMEZ A.
XIX. INTERNATIONAL BIOMED SYMPOSIUM, Aydın, Turkey, 12 - 15 November 2013
2013
2013Elektromanyetik Mikrorobot Tasarımı için İlk Adım : Mikromıknatıslar
BALTACI A. , ÖZBODUÇ G., KORKUT V., GÜRSES B. O. , SABANCI S. , SARIKANAT M. , et al.
II. ULUSAL EGE KOMPOZİT MALZEMELER SEMPOZYUMU, İzmir, Turkey, 07 November 2013, pp.326-328
2013
2013Termoset Kompozitlerin Geri Kazanımı ve Mekanik Özelliklerinin İncelenmesi
ÖZDEMİR O., ŞEN i., DOĞAN E., ANDİÇ ÇAKIR Ö. , SARIKANAT M. , SEVER K.
II. Ulusal Ege Kompozit Malzemeler Sempozyumu, Turkey, 7 - 09 November 2013
2013
2013Investigation of Central Nervous System Neurons Under Mechanical Tension: An in vitro Traumatic Brain Injury Model
DUMAN M., SARIKANAT M. , ŞENDEMİR ÜRKMEZ A.
19th Congress of the European Society of Biomechanics, 25 - 28 August 2013
2012
2012Üst çenede çapraşıklığın olduğu ve güldüğünde çok fazla diş etinin göründüğü bir vak’a için invaziv olmayan tedavi yaklaşımı
TOMAN M. , TOKSAVUL S. , SARIKANAT M. , TAMAÇ E.
Ege Bölgesi Dişhekimleri Odaları 18. Uluslararası Bilimsel Kongre ve Sergisi, İzmir, Turkey, 30 November 2012, pp.3-5
2012
2012Applications of Microalgae for Tissue Engineering
DEMİRKAYA Ç., ÇELİK C., SARIKANAT M. , CONK DALAY M., ŞENDEMİR ÜRKMEZ A.
FIRST NATIONAL WORKSHOP ON MARINE BIOTECHNOLOGY AND GENOMICS, Muğla, Turkey, 24 - 25 May 2012
2011
2011Kitosan/CaP Doku Mühendisliği İskelelerinin Mekanik Karakterizasyonu
DUMAN O. M. , KILIÇ A. M. , SARIKANAT M. , ŞENDEMİR ÜRKMEZ A.
1. Ulusal Ege Kompozit Malzemeler Sempozyumu, Turkey, 17 - 19 November 2011
2011
2011Miroalg Katkısının Kitosan Doku Mühendisliği İskelelerinin Biyouyumluluk Ve Mekanik Özelliklerine Etkileri
CELİK C., DEMİRKAYA Ç., SARIKANAT M. , CONK DALAY M., ŞENDEMİR ÜRKMEZ A.
1. Ulusal Ege Kompozit Malzemeler Sempozyumu, Turkey, 17 - 19 November 2011
2011
2011Mikroalg katkısının kitosan doku mühendisliği iskelelerinin biyouyumluluk ve mekanik özelliklerine etkisi
Çelik C., Demirkaya Ç., SARIKANAT M. , DALAY M. , ŞENDEMİR ÜRKMEZ A.
I. Ulusal Ege Kompozit Nanomalzemeler Sempozyunu, İzmir, Turkey, 17 - 19 November 2011
2011
2011Isıl Çevrimin Jüt Fiber/Yüksek Yoğunluklu Polietielen (YYPE) Kompozitlerin Tabakalararası Kayma Dayanımının Etkisi
SEVER K., SARIKANAT M. , SEKİ Y., TAVMAN İ. H. , SEVER K.
6th International Advanced Technologies Symposium (IATS’11), 16 - 18 May 2011
2011
2011Jute/Polyester Composites: The Effect of Water Aging on The Interlaminar Shear Strength (ILSS)
SEKİ Y., SEVER K., SARIKANAT M. , SEN İ., ARAL A.
6th International Advanced Technologies Symposium (IATS’11), 16 - 18 May 2011
2010
2010Polimerik Kompozit Yapılarda Fiber Oryantasyonun Titreşim ve Mekanik Davranışa Etkisinin Nümerik Yöntemlerle İncelenmesi
GÜRSES B. O. , SEVER K., SARIKANAT M. , BALTACI A.
II. ULUSLARARASI KATILIMLI POLİMERİK KOMPOZİTLER SEMPOZYUMU, İzmir, Turkey, 26 November 2010, pp.213-228
2010
2010Preparation and Mechanical Properties of Graphite Filled HDPE Nanocomposite
SARIKANAT M. , SEVER K., ERBAY E., GÜNER F., TAVMAN İ. H. , TURGUT A., et al.
13th International Materials Symposium (IMSP’xx2010), 13 - 15 October 2010
2010
2010Preparation and SEM Characterization of Nanocomposites Based on HDPE and Garphite Powder
SARIKANAT M. , TAVMAN İ. H. , SEVER K., TURGUT A., SEKİ Y., ERBAY E., et al.
6th NanoScience and Nanotechnology Conference, 15 - 18 July 2010
2010
2010Hibrit Çelik Lif Takviyeli Poliester Kompozit Kirişlerin Mekanik Özellikleri ve Manyetik Alanlar Altında Titreşim Davranışı
GÜRSES B. O. , BALTACI A. , SARIKANAT M. , BOZTEPE M.
4th International Technical Textiles Congress, İstanbul, Turkey, 16 May 2010, pp.30
2010
2010Enhacement of The Mechanical and Vibrational Properties of Glass/Polyster Composites via Matrix Modification
ERDEN S. , SEVER K., SEKİ Y., SARIKANAT M.
4th International Technical Textiles Congress, 16 - 18 May 2010
2009
2009The Influence of Oxygen Plasma Treatment of Jute Fibers on Mechanical Properities of Jute Fiber Reinforced Thermoplastic Composites
SEKİ Y., SEVER K., SARIKANAT M. , GÜLEÇ H. A. , TAVMAN İ. H.
5th International Advanced Technologies Symposium (IATS’11), 13 - 15 May 2009
2009
2009Developing an in-vitro mechanical stretching system for moleculer cell biology studies (in English)
Demirci T., OFLAZ H., SARIKANAT M. , Sakizh M.
14th National Biomedical Engineering Meeting, İzmir, Turkey, 20 - 22 May 2009, pp.202-0
2007
2007Fracture resistance of endodontically treated teeth. Part 2: Effect of noble metal alloy post and core material
TOMAN M. , TOKSAVUL S. , SARIKANAT M. , Schmage P., NERGİZ İ.
Turkish Prosthodontic and Implantology Association 16th International Scientific Congress, İzmir, Turkey, 28 October 2007, pp.3-5
2005
2005Damping effects of rubber layer in laminated composite circular plate during forced vibration
BALTACI A. , SARIKANAT M. , YILDIZ H.
7th International Conference on Vibration Problems (ICOVP 2005), İstanbul, Turkey, 5 - 09 September 2005, vol.111, pp.63-0
2002
2002Endodontik olarak tedavi edilmiş dişlerde zirconia seramik postların uygulanması (Cosmopost tekniği)
TOMAN M. , TOKSAVUL S. , SARIKANAT M. , NERGİZ İ., Schmage P.
TDB Uluslararası Dişhekimliği 9. Kongresi, İzmir, Turkey, 18 June 2002, pp.12-22
2000
2000KALIN KOMPOZİT BİR KİRİŞİN SONLU ELEMANLAR YÖNTEMİYLE ANALİZİNDE ELAMAN ÖZELLİKLERİNİN ETKİSİ
YILDIZ H. , SARIKANAT M.
3. GAP Mühendislik Kongresi, Turkey, 24 - 26 May 2000
Supported Projects
2020 - Continues
2020 - ContinuesKatkı malzemesi olarak kullanılacak bor türevlerinin poliüretan yalıtım malzemelerine etkilerinin incelenmesi
Project Supported by Higher Education Institutions
GÜRLEK G. (Executive) , ALTAY L. , SARIKANAT M.
2018 - 2022
2018 - 2022KARBON VE ALÜMİNYUM NİTRÜR DOLGULARININ POLİMERİK KOMPOZİTLERİN TERMAL VE MEKANİK ÖZELLİKLERİNE ETKİLERİNİN İNCELENMESİ
Project Supported by Higher Education Institutions
SARIKANAT M. (Executive) , ALTAY L. , YENİER Z.
2018 - 2021
2018 - 2021TERSİNE MÜHENDİSLİK UYGULAMALARI İLE HAVACILIK PARÇALARININ TOPOLOJİK OPTİMİZASYONU
Project Supported by Higher Education Institutions
BALTACI A. (Executive) , ERKEK M. , GÜRSES B. O. , SABANCI S. , SARIKANAT M.
2019 - 2020
2019 - 2020KATMANLI ÜRETİM TEKNOLOJİLERİNE UYGUN KİŞİYE ÖZEL KEMİK BENZERİ MÜHENDİSLİK PLASTİKLERİNİN GELİŞTİRİLMESİ
TUBITAK Project
Altay L. , Sarıkanat M. (Executive) , Gürses B. O. , Şendemir A. , Gökmen F. , Baltacı A.
2018 - 2020
2018 - 2020HALOJEN İÇERMEYEN YÜKSEK OKSİJEN KISITLAMA ENDEKSİ DEĞERİNE SAHİP POLİAMİD 6 TABANLI KOMPOZİT MALZEMELERİN GELİŞTİRİLMESİ
TUBITAK Project
Altay L. , Sarıkanat M. , Seki Y., İşbilir A.(Executive)
2017 - 2020
2017 - 2020KARBON TABANLI YÜKSEK TERMAL İLETKENLİĞİNE SAHİP POLİMERİK KOMPOZİT MALZEME GELİŞTİRİLMESİ VE ISI KUYUSU UYGULAMALARINDA KULLANILABİLİRLİĞİNİN İNCELENMESİ
TUBITAK Project
Gürlek G. , Sarıkanat M. , Altay L. (Executive)
2017 - 2020
2017 - 2020
OTOMOTİV SEKTÖRÜNDE KULLANILAN PLASTİK ESASLI ATIKLARIN YUKARI DÖNÜŞÜM TEKNİĞİ KULLANILARAK GERİ DÖNÜŞÜMÜ VE ALFA ÇEKİRDEKLENDİRİLMİŞ POLİPROPİLEN ESASLI KOMPOUNDLARIN GELİŞTİRİLMESİ
TUBITAK Project
Altay L. , Sarıkanat M. , Gökkurt T.(Executive)
2016 - 2020
2016 - 2020İnfüzyon Deney Düzeneği ve Simülasyon Çalışmaları ile Rüzgar Türbin Kanadı İmalat Proses Performansının Geliştirilmesi
TUBITAK Project
Sarıkanat M. , Altay L. , Karaşahin N. İ. (Executive)
2017 - 2019
2017 - 2019Termal Yönetim Uygulamalarına Yönelik Yüksek Termal İletkenliğe Sahip Elektriksel İletken Termoplastik Kompozit Malzemelerin Geliştirilmesi
TUBITAK Project
Altay L. , İşbilir A.(Executive), Sarıkanat M.
2015 - 2019
2015 - 2019Aerojel İçeren Yeni Nesil Isı Yalıtım Malzemelerinin Geliştirilmesi
TUBITAK Project
Akdemir Ö. (Executive) , Sarıkanat M. , Andiç Çakır Ö. , Seki Y., Sever K., Seydibeyoğlu M. Ö.
2017 - 2018
2017 - 2018
BİNA UYGULAMALARI İÇİN ENERJİ VERİMLİLİĞİ YÜKSEK POLİMERİK KOMPOZİT MALZEME GELİŞTİRİLMESİ
Project Supported by Higher Education Institutions
ALTAY L. (Executive) , ANDİÇ ÇAKIR Ö. , SARIKANAT M. , GÜRLEK G.
2016 - 2018
2016 - 2018Ege Üniversitesi Ar-Ge Strateji Belgesi (Kimyasal Teknolojiler)
TUBITAK Project
Atalay S. (Executive) , Kabay N. , Akçakoca Kumbasar E. P. , Helvacı Ş. Ş. , Sarıkanat M. , Ersöz G. , et al.
2016 - 2017
2016 - 2017YÜKSEK TERMAL İLETKENLİĞİNE SAHİP KARBON KATKILI POLİMERİK KOMPOZİT MALZEME GELİŞTİRİLMESİ
Project Supported by Higher Education Institutions
Altay L. (Executive) , Sarıkanat M. , Seki Y.
2015 - 2017
2015 - 2017Üzüm Bağ Çubuğu Ve Prina Atıkları İle Katkılı Polimer Esaslı Kompozitlerin Üretimi Ve Özelliklerinin Geliştirilmesi
TUBITAK Project
Sarıkanat M. , Sever K.(Executive)
2014 - 2017
2014 - 2017Grafen Takviyeli Polimerik Kompozit Kompakt Isı Degistiricisi Tasarımı ve Üretimi
Industrial Thesis Project
SARIKANAT M. (Executive) , ÇOBAN M. T. , AKDEMİR Ö.
2013 - 2016
2013 - 2016İYONİK POLİMER-METAL KOMPOZİT AKTÜATÖRLERİN (EYLEYİCİLER) ÜRETİMİ, KONTROLÜ VE BİYOMİMETİK UYGULAMALARDA KULLANIM
Project Supported by Higher Education Institutions
SARIKANAT M. (Executive)
2013 - 2016
2013 - 2016AKILLI POLİMERİK MALZEMELRİN ÜRETİMİ VE KAREKTERİZASYONU
Project Supported by Higher Education Institutions
SARIKANAT M. (Executive)
2013 - 2016
2013 - 2016MEKANİK GERME ALTINDA MERKEZİ SİNİR SİSTEMİ NÖRONLARININ İNCELENMESİ VE İN VİTRO BİR TRAVMATİK BEYİN HASARI MODELİ
Project Supported by Higher Education Institutions
ŞENDEMİR A. (Executive) , BALKAN B. , ARMAGAN G. , YALÇIN A. , SARIKANAT M.
2013 - 2015
2013 - 2015Toz Tutmayan Antistatik Kompozit Vernik Üretimi
Industrial Thesis Project
SARIKANAT M.
2013 - 2015
2013 - 2015İyonik Polimer Metal Kompozit Aktüatörlerin Eyleyiciler Üretimi Kontrolü Ve Biyomimetik Uygulamalarda Kullanimi
TUBITAK Project
Sarıkanat M. (Executive)
2012 - 2015
2012 - 20156 Serbestlik Dereceli Mikrorobot Için Temassız Elektromanyetik Aktüatör Sisteminin Tasarımı Ve Üretimi
TUBITAK Project
Baltacı A. (Executive) , Sarıkanat M. , Boztepe M.
2012 - 2014
2012 - 2014Mekanik Gerilme Altında Merkezi Sinir Sistemi Nöronlarının İncelenmesi Ve In Vitro Bir Travmatik Beyin Hasarı Modeli
TUBITAK Project
Şendemir A. (Executive) , Yalçın A. , Sarıkanat M. , Armagan G.
2012 - 2014
2012 - 2014ELEKTROKİMYASAL BİRİKTİRME YÖNTEMİYLE MİKRO MIKNATIS ÜRETİMİ
Project Supported by Higher Education Institutions
ÇAVUŞOĞLU N. (Executive) , BALTACI A. , SARIKANAT M. , BOZTEPE M. , GÜRSES B. O. , SABANCI S. , et al.
2010 - 2014
2010 - 2014REJENERATİF MANYETİK DAMPER İÇİN GÜÇ ARABİRİMİ TASARIMI VE KONTROLÜ
Project Supported by Higher Education Institutions
BOZTEPE M. (Executive) , SARIKANAT M. , BALTACI A. , GÜRSES B. O.
2010 - 2014
2010 - 2014REJENERATİF MANYETİK DAMPERİN MEKANİK TASARIMI VE ÜRETİMİ
Project Supported by Higher Education Institutions
BALTACI A. (Executive) , SARIKANAT M. , BOZTEPE M. , GÜRSES B. O.
2010 - 2014
2010 - 2014KİTOSANIN ELEKTRİKSEL, YAPISAL KARAKTERİZASYONU, UYARIYA TEPKİ VEREN (STİMULİ RESPONSİVE) VE KENDİ KENDİNİ ONARICI (SELF HEALİNG) ÖZELLİKLERİNİN İNCE FİLM KAPLAMALARDA VE KOMPOZİT MALZEMELERDE İNCELENMESİ.
Project Supported by Higher Education Institutions
MERMER Ö. (Executive) , SARIKANAT M. , ANDİÇ ÇAKIR Ö. , ŞENDEMİR A. , ERDEN S. , SEKİ Y.
2010 - 2013
2010 - 2013KİTOSANIN ELEKTRİKSEL, YAPISAL VE MEKANİK KARAKTERİZASYONU, UYARIYA TEPKİ VEREN (STİMULİ RESPONSİVE) VE KENDİ KENDİNİ ONARICI (SELF HEALİNG) ÖZELLİKLERİNİN İNCE FİLM KAPLAMALARDA VE KOMPOZİT MALZEMELERDE İNCELENMESİ.
Project Supported by Higher Education Institutions
SARIKANAT M. (Executive) , SEKİ Y., ŞENDEMİR A. , ANDİÇ ÇAKIR Ö. , ERDEN S. , MERMER Ö.
2010 - 2013
2010 - 2013BİR SANTRİFÜJ İÇİN PROTOTİP AKTİF MANYETİK YATAK SİSTEMİ TASARIMI VE OPTİMİZASYONU
Project Supported by Higher Education Institutions
BALTACI A. (Executive) , BOZTEPE M. , SARIKANAT M. , GÜRSES B. O.
2010 - 2012
2010 - 2012Kitosanın elektriksel yapısal ve mekanik karakterizasyonu uyarıya tepki veren stimuli responsive ve kendi kendini onarıcı self healing özelliklerinin ince film kaplamalarda ve kompozit malzemelerde incelenmesi
Project Supported by Higher Education Institutions
Erden S. , Sarıkanat M. (Executive)
2009 - 2012
2009 - 2012DOĞAL FİBER TAKVİYELİ POLİMER KOMPOZİTLERİN ÜRETİMİ,MEKANİK ÖZELLİKLERİN İYİLEŞTİRİLMESİVE KARAKTERİZASYONU
Project Supported by Higher Education Institutions
SARIKANAT M. (Executive) , BALTACI A. , YILDIZ H. , ERDEN S. , PEKEDİS M.
2007 - 2010
2007 - 2010DOĞAL FİBER VE CAM FİBER TAKVİYELİ POLİMER KOMPOZİT KİRİŞLERİN TİTREŞİM DAVRANIŞLARI
Project Supported by Higher Education Institutions
SARIKANAT M. (Executive)
Patent
2020
2020Yanmaz özellikte poliketon bazlı malzeme
Patent
Pending / Applied, The Invention Recourse Number: 2019/22144 , Initial Registration
2020
2020Termal iletken poliketon bazlı malzeme
Patent
Pending / Applied, The Invention Recourse Number: 2019/18542 , Initial Registration
2020
2020Long Natural Fiber Reinforced Polypropylene Composites
Patent
Pending / Applied, The Invention Recourse Number: PCT/TR2020/051113 , Initial Registration
2018
2018HALOJEN İÇERMEYEN POLİAMİD BAZLI KOMPOZİT MALZEME
Patent
Pending / Applied, The Invention Recourse Number: TP18-782 , Initial Registration
Scientific Refereeing
December 2020
December 2020COMPOSITES PART B-ENGINEERING
SCI Journal
December 2020
December 2020JOURNAL OF APPLIED POLYMER SCIENCE
SCI Journal
August 2020
August 2020Materials Chemistry And Physics
SCI Journal
June 2020
June 2020Composites Science And Technology
SCI Journal
June 2020
June 2020MATERIALS & DESIGN
SCI Journal
May 2020
May 2020POLYMER
SCI Journal
February 2020
February 2020Polymer Composites
SCI Journal
Citations
Total Citations (WOS): 1419
h-index (WOS): 21
Scientific Research / Working Group Memberships
2019 - Continues
2019 - Continues